Materials Poured at RTCPL :
| Stainless Steel |
: |
CF8, CF8M, CF3M, CF3, CG3M, CG8M, CA-15, CA-40, CF3MN, CA6NM, CK-20, CN7M, CF8C, CE30, HK30, HK40, HF30, CG6MMN. |
| Nickel based Steels |
: |
CW12MW, CX2MW, CW2M, CW6M, CW6MC, CZ100, CY40, N7M, N12MV, M35-1, M35-2, M30-C, M35-B, 50 Cr-50Ni, 60Cr-40Ni, Cu5MCuC. |
| Duplex Stainless Steel |
: |
Gr.1A, Gr.2A, Gr.3A, Gr.4A, Gr.5A. |
| Carbon Steel |
: |
WBC, LCC, LCB, WCC. |
| Cobalt Based Alloys |
: |
Stellite 6, Stellite 3, Stellite 21, Stellite 31. |
Castings can be supplied as per equipment DIN, JIS, BS and GOST standards.
Other than above, in general we can cast any material compositions as per customers specifications meeting international standards.
Tolerances :
| DIAMETERS (MM) |
LENGTH (MM) |
FLATNESS (MM) (TIR) |
| up to 25.00 |
+/-0.10 |
up to 25.00 |
+/-0.10 |
up to 25.00 |
+/-0.15 |
| Over 25.00 to 50.00 |
+/-0.15 |
Over 25.00 to 50.00 |
+/-0.15 |
Over 25.00 to 50.00 |
+/-0.20 |
| Over 50.00 to 100.00 |
+/-0.25 |
Over 50.00 to 100.00 |
+/-0.25 |
Over 50.00 to 100.00 |
+/-0.35 |
| Over 100.00 to 150.00 |
+/-0.35 |
Over 100.00 to 150.00 |
+/-0.35 |
Over 100.00 to 150.00 |
+/-0.45 |
| Over 150.00 to 200.00 |
+/-0.55 |
Over 150.00 to 200.00 |
+/-0.55 |
Over 150.00 to 200.00 |
+/-0.70 |
| Over 200.00 to 250.00 |
+/-0.75 |
Over 200.00 to 250.00 |
+/-0.75 |
Over 200.00 to 250.00 |
+/-1.20 |
| Over 250.00 to 300.00 |
+/-1.00 |
Over 250.00 to 300.00 |
+/-1.00 |
Over 250.00 to 300.00 |
+/-1.50 |
| Over 300.00 to 350.00 |
+/-1.30 |
Over 300.00 to 350.00 |
+/-1.30 |
Over 300.00 to 350.00 |
+/-1.70 |
| Over 350.00 to 400.00 |
+/-1.50 |
Over 350.00 to 400.00 |
+/-1.50 |
Over 350.00 to 400.00 |
+/-2.00 |
| Over 400.00 to 450.00 |
+/-1.80 |
Over 400.00 to 450.00 |
+/-1.80 |
Over 400.00 to 450.00 |
+/-2.30 |
| |
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| Maximum Casting Size |
: |
500.00 # 500.00 # 500.00 |
| |
|
|
| Weight Range |
: |
0.015 Kilogram to 100.00 Kilograms per piece. |
|
|
|
|
|
